FreeCAD + Claude Course

A beginner CAD course in FreeCAD with Claude over MCP: setup, Sketcher and Pad, spreadsheet parameters, holes and fillets, STL export and mesh checks, safe edits and fixes. Every lesson is done by hand first, then with Claude, and measured by FreeCAD itself.

8 tutorials · start at part 1 or jump anywhere

  1. 1 How to Connect Claude to FreeCAD (MCP Setup) and Make Your First Part Connect Claude to FreeCAD with the freecad-mcp add-on in four steps, then make your first part by hand and by Claude: a 5 x 20 x 60 block, 6,000 mm³ both ways. Oct 29, 2026
  2. 2 FreeCAD Sketcher by Hand vs Claude AI: Sketch and Pad Your First Part Sketch and pad a wall hook in FreeCAD Part Design by hand, then by Claude: 8,500 mm³ both ways, but Claude's sketch has 16 degrees of freedom. Oct 30, 2026
  3. 3 FreeCAD Spreadsheet Parameters by Hand vs Claude AI: Change One Number Name a FreeCAD part's sizes in its built-in spreadsheet, drive the sketch from them, and change one cell: 8,500 to 10,000 to 15,040 mm³. Claude only used names when asked. Nov 3, 2026
  4. 4 FreeCAD Holes and Fillets with Claude AI: Screw Holes That Stay Centred Two screw holes placed from spreadsheet names so they stay centred when a FreeCAD part changes, plus a 2 mm fillet. 9,857.17 mm³, then 30 wide: holes 15 and 15. Oct 31, 2026
  5. 5 FreeCAD Export STL for 3D Printing: Check the Mesh with Claude AI Export the right part from FreeCAD (the Body, not a step of it) and check the STL's volume. The Pad's file had no holes and still passed Check solid mesh. Oct 31, 2026
  6. 6 Edit a FreeCAD Model with Claude AI Without Breaking It Change one FreeCAD spreadsheet size safely: measure with the Measure tool before and after, and check a must-stay-true list. With the list, 3 of 3 Claude runs kept every line. Oct 31, 2026
  7. 7 FreeCAD MCP Not Working? Fix Claude Connection Errors Claude says connected but every FreeCAD request fails? Real freecad-mcp failures reproduced on purpose, from No MCP servers configured to Error executing tool: the exact words and the fix. Oct 31, 2026
  8. 8 FreeCAD Assembly Tutorial: Make a Hook Slide onto a Rail FreeCAD 1.1 assembly step by step: Insert Component, Toggle Grounded, a Slider Joint. Then check the fit yourself with Intersection and Measure: 72.0 mm³ overlap to a 0.4 mm gap. Nov 16, 2026