SolidCraft + Claude Course
A beginner CAD course in SolidCraft, the free open-source CAD program: connect Claude, sketch and extrude a wall hook, named sizes, holes and fillets, export to a slicer, safe edits, fixes and assemblies. Every lesson is done by hand first, then with Claude, and measured both ways.
-
1 How to Connect Claude to SolidCraft: MCP Setup and What Runs Where Connect Claude to SolidCraft, the free open-source CAD program, in three steps, then prove it works: a 20 mm cube that SolidCraft measures at 8,000 mm³. Oct 27, 2026 -
2 SolidCraft Tutorial for Beginners: Sketch a 3D Part by Hand vs Claude Your first SolidCraft sketch and extrude: a wall hook drawn by hand, then by Claude, both measured at 8,500 mm³. One came out upside down. Oct 28, 2026 -
3 SolidCraft Parameters by Hand vs Claude: Named Sizes for Beginners Give a SolidCraft part's sizes names, change one number and the whole hook updates: 8,500 to 10,000 mm³. The same change on plain numbers is refused. Oct 30, 2026 -
4 SolidCraft Holes and Fillets by Hand vs Claude: Centered Screw Holes Two screw holes and a rounded edge on a SolidCraft wall hook, and why holes typed as 10 slide off-centre when the part gets wider. The fix: width / 2. Oct 31, 2026 -
5 SolidCraft to 3D Printer: Export STL/3MF and Check It in the Slicer Export a SolidCraft part to PrusaSlicer and run four checks before you print. Standing: 33 min and a warning. On its side: 15 min, no warning, same 5.37 g. Oct 31, 2026 -
6 Edit a 3D Model with Claude AI Without Breaking It (SolidCraft) Change one SolidCraft parameter safely: measure before and after, and check a must-stay-true list. With the list, 3 of 3 Claude runs kept every line. Oct 31, 2026 -
7 SolidCraft MCP Not Working? Fix Claude Tool Call Errors Seven real SolidCraft MCP errors, reproduced on purpose: No MCP servers configured, Failed to connect, headless session, rolled_back. The exact words and the fix. Oct 30, 2026 -
8 SolidCraft Assembly: Make a Hook Slide on a Rail (0.4 mm Gap) SolidCraft assembly step by step: components, ground, an As-Built slider joint, contact and Drive. Check the fit with Interference and Measure: 72 mm³ overlap to a 0.4 mm gap. Nov 16, 2026